Printable Holders for VR Headsets
󰍜
󰗊

Printable Holders for VR Headsets

A ready-made solution that saves the trouble of both finding the right spot to place the Alt and finding the way to properly secure the device.
Printable Holders for VR Headsets are here to provide ease of use, reliability, and accuracy of placement of a socket with the Alt on the VR headset. Scroll down to learn about the technical specifications, recommendations on the material that is better to use for printing, as well as to find the links necessary for setting the proper placement of the Alt.
The holders described in this article provide you only with some socket placement options. You can place the sockets elsewhere so it suits your needs.

In this article

  1. Printing and getting started
  2. Holders for Meta Quest 2
  3. Holder for Meta Quest 3
  4. Holder for PICO Neo3 and PICO Neo3 Pro
  5. Holder for PICO 4
  6. Holder for Lenovo ThinkReality VRX

Printing and getting started

These steps will guide you in making and attaching the holder, as well as in fastening the Alt and setting its placement:
  1. Download a 3D model for your VR headset (Meta2, Meta3, PICONeo3, PICO4, LenovoThinkRealityVRX).
  2. Print a holder using 3D printer.
  3. Attach the holder to your VR headset. First, secure the lower part of the holder, then the upper one (until it clicks into place).
    Attach the holder in the specified sequence to prevent it from breaking.
  4. Place the socket with the Alt in a special depression. Fasten it with screws — use either M2x10 DIN 912 or M2x12 DIN 912 screws.
    Avoid using tape to secure a socket on a holder. Fasten a socket with screws to be sure the device is fastened properly.
  5. Choose and copy a link suitable for your device (Meta2, Meta3, PICONeo3, PICO4, LenovoThinkRealityVRX) to set its placement. Then do the following:
    • run AntilatencyService;
    • go to the Placements tab;
    • click + in the right corner of the screen;
    • choose From link;
    • paste the link in the Enter url here line;
    • enter a name in the Enter name here line and click SAVE.
      Note that the link and name lines can be autofilled.
  6. Click Set as default to set the loaded placement as a default one.

Holders for Meta Quest 2

Download the 3D model of the holder made for Meta Quest 2 to your device by clicking the button below.

Technical specifications of the holder made for Meta Quest 2

Material
PETG(ASA)
Nozzle diameter
0.4 mm
Layer thikness
0.1 mm
Support
Yes
Infill
30%
Rafts
Yes
Placement links for Meta Quest 2:
  • top: http://www.antilatency.com/antilatencyservice/placement?data=AAAAAABokW09YOVQPdoPyb8AAAAA2gJPw&name=Quest2PrintedTop
  • bottom: http://www.antilatency.com/antilatencyservice/placement?data=AAAAAAAAAAAADi2yPQAAAIAAAAAA1wJPw&name=Quest2Printed
Download the 3D model of the holder made for Meta Quest 2 to your device by clicking the button below.

Technical specifications of the holder made for Meta Quest 2

Material
PETG
Nozzle diameter
0.4 mm
Layer thikness
0.2 mm
Support
Yes
Infill
15%
Rafts
Yes
Placement link for Meta Quest 2: http://www.antilatency.com/antilatencyservice/placement?data=AIC9bwK1yM8Di2yPQAAAIAAAAAAAAAAAA&name=Quest2Printed

Holder for Meta Quest 3

Download the 3D model of the holder made for Meta Quest 3 to your device by clicking the button below.

Technical specifications of the holder made for Meta Quest 3

Material
PETG
Nozzle diameter
0.4 mm
Layer thikness
0.2 mm
Support
Yes
Infill
30%
Rafts
Yes
Placement links for Meta Quest 3:
  • top: http://www.antilatency.com/antilatencyservice/placement?data=AOOlGzwxCCw9JQaBPZIKhr8BAIAz2AJPw&name=Quest3PrintedTop
  • bottom: http://www.antilatency.com/antilatencyservice/placement?data=AOOlGzz8qXG9JQaBPZEKhj38z2AJPw&name=Quest3PrintedBottom

Holder for PICO Neo3 and PICO Neo3 Pro

Download the 3D model of the holder made for PICO Neo3 and PICO Neo3 Pro to your device by clicking the button below.

Technical specifications of the holder made for PICO Neo3 and PICO Neo3 Pro

Material
PETG
Nozzle diameter
0.4 mm
Layer thikness
0.2 mm
Support
Yes
Infill
30%
Rafts
Yes
Placement links for PICO Neo3 and PICO Neo3 Pro:
  • top: http://www.antilatency.com/antilatencyservice/placement?data=AAAAAAAmBoE9KlxPathnLXxIz2g9JwA&name=PicoNeo3Top
  • bottom: http://www.antilatency.com/antilatencyservice/placement?data=AKabxDsSg0C9CtejPdoPST8AAAAA2AJPw&name=PicoNeo3Bottom

Holder for PICO 4

Download the 3D model of the holder made for PICO 4 to your device by clicking the button below.

Technical specifications of the holder made for PICO 4

Material
PETG(ASA)
Nozzle diameter
0.4 mm
Layer thikness
0.2 mm
Support
Yes
Infill
30%
Rafts
Yes
Placement links for PICO 4:
  • top: http://www.antilatency.com/antilatencyservice/placement?data=AArXozs2Xjo9bhIDPaphnL8AAAAA3QJPw&name=Pico4TopPrinted
  • bottom: http://www.antilatency.com/antilatencyservice/placement?data=AArXozsz5i69rkdhPdgPST8AAAAA1wJPw&name=Pico4BottomPrinted

Holder for Lenovo ThinkReality VRX

Download the 3D model of the holder made for Lenovo ThinkReality VRX to your device by clicking the button below.

Technical specifications of the holder made for Lenovo ThinkReality VRX

Material
PETG
Nozzle diameter
0.4 mm
Layer thikness
0.2 mm
Support
Yes
Infill
30%
Rafts
Yes
Placement links for Lenovo ThinkReality VRX:
  • top: http://www.antilatency.com/antilatencyservice/placement?data=ALx0EzzhCxM9DCSoPdoPSb8AAAAA2AJPw&name=PrintedLenovoTop
  • bottom: http://www.antilatency.com/antilatencyservice/placement?data=ALx0EzzfcQq9DXGsPdoPST8AAAAA2AJPw&name=PrintedLenovoBottom