How to set up a truss tracking area

How to set up a truss tracking area

This section describes the installation of a Truss tracking area.
Truss tracking area is one of the Environment types, which consists of Truss Reference Bars connected in series. The reference bars are fixed onto the suspended truss with special fasteners. The kit includes a template for reference bar positioning, H05VV-F 2x1.5 Black cables with GX16 connectors installed (socket).

Trusses specification

To install the tracking area, a suspended truss structure is used. It's assembled by the user from segments such as Global Truss F33250, F34250 and 4-way corner junctions F33C41, F34C41 or similar ones (subject to the overall and installation dimensions). These trusses are made up of segments manufactured from durable aluminum alloy EN-AW 6082 T6. The truss segment length is 2.5 m and the junction length is 0.5 m. Thus, the step of the structure is 3.0 m. The diameter of the main pipes is 50 mm, the distance between the pipes centers is 240 mm. The trusses have 4-point anchoring edges for the installation of quick-release couplings.
Please note that the trusses are purchased and installed by the customer on their own. They are not included in the tracking area delivery kit. Before placing the Truss Reference Bars, make sure that the trusses are strictly horizontal.

For truss tracking area setup you will need:

Сonfiguring the Environment scheme in AntilatencyService

To create or modify the Environment scheme, use the AntilatencyService application.
It is recommended to use ready-made Environment examples for truss tracking areas of various sizes.

Environment Examples for Truss Tracking Area

We have prepared examples for typical truss installations.
Assembled truss outline
Trusses Count
Truss Reference Bar Count
Environment example
F33250 / F34250 x 4
F33C41 / F34C41 x 4
4 pcs.
F33250 / F34250 x 7
F33C41 / F34C41 x 6
7 pcs.
F33250 / F34250 x 12
F33C41 / F34C41 x 9
12 pcs.
F33250 / F34250 x 17
F33C41 / F34C41 x 12
17 pcs.
F33250 / F34250 x 24
F33C41 / F34C41 x 16
24 pcs.
F33250 / F34250 x 31
F33C41 / F34C41 x 20
31 pcs.

Assembling a truss tracking area

Truss Reference Bars are placed onto a pre-assembled truss structure (according to the Environment scheme). Bracket mounts securely fix reference bars on truss segments.
The reference bars must be placed in strictly horizontal position. Any deviation from this position will negatively affect the tracking quality! Therefore, we do not recommend to install additional equipment on the same trusses where the tracking area is located. This is allowed only in case of extreme necessity. Be sure to check the position of the reference bars after installing additional equipment!
A special template should be used when positioning the reference bars (it's included in a kit). The template is put on the tapered connector closest to the edge of the segment with a hole and is fixed to the truss using a flexible fastener. A reference bar is installed close to it.
Thus, there are 4 possible placement options for each bar on the selected truss segment: with an offset from the beginning or end of the truss segment and with two possible slope angles. In the diagram, T is a template, TRB is a truss reference bar.

Truss Reference Bars Connection

Electrical switching is designed in a way that allows you to assemble a tracking area of any complexity without splitters. All wiring options can be implemented using cables included in the kit. Branching is done using paired connectors on Truss Reference Bars housings.

Power supply connection

It is recommended to use the following power supply to ensure the operation of the truss tracking area. The power supply is equipped with an AS-216-EN input connector with a switch and three KF2EDGWB-5.08 output connectors. In addition, the set to the power supply includes a H05VV-F 2x1.5 cable with an installed GX16 connector (female) for convenient connection of reference bars.
After installing the power supply, you can connect the tracking area. If everything is assembled correctly, then all indicators of the IR markers will light green. The truss tracking area is ready for use.